SS500 Moisture Analyzer
SS500 Moisture Analyzer
SS500 Moisture Analyzer
SS500 Moisture Analyzer
SS500 Moisture Analyzer
SS500 Moisture Analyzer

SS500 Moisture Analyzer

$6,250.00

Endress+Hauser

SS500 analyzer is an economical choice for measuring H2O concentration in natural gas without coming into physical contact with the stream. The result is a sensor that does not suffer from contamination or drift due to vapor impurities such as glycol, methanol, or amines.

  • Natural gas quality measurements in production, storage, transportation, and distribution

  • Monitoring for natural gas pipelines, processing plants

 

SKU: SS500 Categories: , Tags: ,

Description

Field of application

Using patented tunable diode laser spectroscopy (TDLAS) technology, the SS500 analyzer is an economical choice for measuring H2O concentration in natural gas without coming into physical contact with the stream. The result is a sensor that does not suffer from contamination or drift due to vapor impurities such as glycol, methanol, or amines.

  • Natural gas quality measurements in production, storage, transportation, and distribution

  • Monitoring for natural gas pipelines, processing plants, compressor stations, gathering sites, and distribution quality

  • Suitable for use as a check-measurement device

  • Measurable ranges of up to 0-250 lb/mmscf (0-5275 ppm) H2O

Benefits

  • Economical real-time moisture measurements

  • Virtually maintenance-free

  • Reliable in harsh environments

  • Fast and accurate with no wet-up or dry-down delays

  • No contamination or drift due to vapor impurities such as glycol, methanol, amines, hydrogen sulfide, or mercaptans

  • NIST-traceable calibration with analog and serial outputs for remote monitoring

  • CSA certified for CSA Class 1, Division 2 or Class 1, Division 1

Additional information

Brand

Endress+Hauser/E+H
Measuring principle

TDLAS
Product Headline

An economical gas analyzer for moisture (H2O) in the natural gas industry. The sensor measures gas using tunable diode laser absorption spectroscopy (TDLAS) to determine the concentration of the gas without coming into physical contact with the stream. Option of simplified sample conditioning to reduce complexity of the analyzer system.
Channels

1
Analyte and Measurement ranges

H2O (Moisture):
5 to 422 ppmv (minimum)
5 to 2110 ppmv (maximum)
Measured Variables

Concentration
Dew Point
Cell Pressure
Cell Temperature
Ambient Temperature range

-20 to 50°C (-4 to 122°F)
Operating Pressure range

Inlet Pressure: 140 to 350 kPa (20 to 50 psig)
Sample Cell: 700 to 1400 mbara
Analyzer Wetted materials

316L stainless steel
FKM O-Rings
Glass
Power supply

100 to 240 VAC, 50 to 60 Hz
or
9 to 16 VDC or 18 to 32 VDC – optional
1 Amp maximum at 120 VAC
1.6 Amps at 24VDC, 3.2 Amps at 12 VDC
Communication

Analog Output: 1 or 2 4-20mA Isolated, 1200 ohms at 24 VDC max load
Serial: RS232C
Protocol: Modbus Gould RTU or Daniel RTU or ASCII
Alarms: 2, General Fault and Concentration Alarms via Modbus and Analog Output(s)
Housing materials

Electronics: 304 stainless steel (Class I Division 2)
Sample System Panel: anodized aluminum
Hazardous area approvals

CSA Class I, Division 2
CSA Class I, Zone 2
Degree of protection

Type 3R (Class I Division 2)

Reviews

There are no reviews yet.

Be the first to review “SS500 Moisture Analyzer”

Your email address will not be published. Required fields are marked *

Related products