SS2100i Gas Analyzer

$6,200.00

Endress+Hauser

SS2100i gas analyzers accurately measure trace gas components (H2O, CO2, H2S, NH3, and C2H2) using tunable diode laser absorption spectroscopy (TDLAS) technology. The analyzers require little maintenance and do not need recalibration or periodic replacement parts. SS2100i gas analyzers are certified for ATEX/IECEx Zone 1.

  • Gas analysis: ppb level measurement of H2O & NH3, ppm level measurement of H2O, H2S, CO2, NH3, and C2H2, and % level measurement of H2S and CO2

  • Natural gas: production, storage, transportation, distribution

 

Description

Field of application

SS2100i gas analyzers accurately measure trace gas components (H2O, CO2, H2S, NH3, and C2H2) using tunable diode laser absorption spectroscopy (TDLAS) technology. The analyzers require little maintenance and do not need recalibration or periodic replacement parts. SS2100i gas analyzers are certified for ATEX/IECEx Zone 1.

  • Gas analysis: ppb level measurement of H2O & NH3, ppm level measurement of H2O, H2S, CO2, NH3, and C2H2, and % level measurement of H2S and CO2

  • Natural gas: production, storage, transportation, distribution

  • Refinery: hydrogen recycle, catalytic reforming, flaring, cracking

  • Gas processing: fractionation, sour/acid gas removal

  • LNG: liquefication, custody transfer

  • Petrochemical: cracking, acetylene converter, caustic wash tower

  • Biomethane: custody transfer measurements of CO2, H2S, H2O

Benefits

  • Accurate, real-time measurements not hampered by wet-up (absorption) or dry-down (desorption)

  • Virtually maintenance free and reliable in harsh environments

  • Dependable with greater repeatability than surface-based sensors with NIST-traceable calibration

  • Analog and serial outputs for remote monitoring

  • Low cost of ownership, no consumables

  • Available for the following measurements: H2O, CO2, H2S, NH3, C2H2

  • ATEX/IECEx Zone 1 certified

Additional information

Brand

Endress+Hauser/E+H

Measuring principle

TDLAS

Product Headline

An advanced gas analyzer for hydrogen sulfide (H2S) measurement. The SS2100i uses tunable diode laser absorption spectroscopy (TDLAS) to determine the concentration of the analyte without coming into physical contact with the stream.

Channels

1

Analyte and Measurement ranges

H2S (Hydrogen Sulfide):
0 to 10 ppmv
0 to 1000 ppmv
0 to 5000 ppmv
0 to 5% volume

Measured Variables

Concentration
Cell Pressure
Cell Temperature

Ambient Temperature range

-20 to 50°C (-4 to 122°F)
Optional (i-2 only): -10 to 60°C (14 to 140°F)

Operating Pressure range

Inlet Pressure: 140 to 350 kPa (20 to 50 psig)
Sample Cell: 800 to 1200 mbara or 950 to 1700 mbara (optional)

Analyzer Wetted materials

316L stainless steel
FKM O-Rings
Glass

Power supply

120 or 240 VAC ± 10 %, 50 to 60 Hz; 300W

Communication

Analog Output: Two 4-20mA Isolated, 1200 ohms at 24 VDC max load (measurement value)
Analog Input: One 4-20mA Isolated, 1200 ohms at 24 VDC max load (process pressure)
Serial: RS232C and Ethernet
Protocol: Modbus Gould RTU or Daniel RTU or ASCII
Digital Outputs: 5, Concentration Alarm, General Fault, Validation Fail, Validation 1 Active, Validation 2 Active
Digital Inputs: 2, Flow Alarm, Validation Request

Housing materials

Electronics: Copper-free Aluminum
Laser/Cell Enclosure: Copper-free Aluminum (i-2 only)
Sample System Enclosure: 304 or 316 stainless steel

Hazardous area approvals

IECEx / ATEX / CNEx / KC / CCOE / CML Zone 1

Degree of protection

IP66

Product safety

CE

Metrological approvals

PAC China, Kazakhstan (i-1 only)

Reviews

There are no reviews yet.

Be the first to review “SS2100i Gas Analyzer”

Your email address will not be published. Required fields are marked *