SS2100 Gas Analyzer
SS2100 Gas Analyzer
SS2100 Gas Analyzer
SS2100 Gas Analyzer
SS2100 Gas Analyzer
SS2100 Gas Analyzer
SS2100 Gas Analyzer

SS2100 Gas Analyzer

$6,000.00

Endress+Hauser

The SS2100 gas analyzer measures specific gases (H2O, CO2, H2S, NH3, and C2H2) with precision while avoiding interferences that are common with traditional infrared analyzers. The SS2100 analyzer requires little maintenance and does not need recalibration or periodic replacement parts.

  • Gas analysis: ppb level measurement of H2O & NH3, ppm level measurement of H2O, H2S, CO2, NH3, and C2H2, and percent (%) level measurement of H2S and CO2

  • Natural gas: production, storage, transportation, distribution

 

SKU: SS2100 Categories: , Tags: ,

Description

Field of application

Using patented tunable diode laser absorption spectroscopy (TDLAS) technology, the SS2100 gas analyzer measures specific gases (H2O, CO2, H2S, NH3, and C2H2) with precision while avoiding interferences that are common with traditional infrared analyzers. The SS2100 analyzer requires little maintenance and does not need recalibration or periodic replacement parts.

  • Gas analysis: ppb level measurement of H2O & NH3, ppm level measurement of H2O, H2S, CO2, NH3, and C2H2, and percent (%) level measurement of H2S and CO2

  • Natural gas: production, storage, transportation, distribution

  • Refinery: hydrogen recycle, catalytic reforming, flaring, cracking

  • Gas processing: fractionation, sour/acid gas removal

  • LNG: liquefication, custody transfer

  • Petrochemical: cracking, acetylene converter, caustic wash tower

  • CCUS: measure trace H2S and H2O in 100% CO2

Benefits

  • Accurate, real-time measurements

  • Low cost of ownership, no consumables and virtually maintenance-free and reliable in harsh environments

  • Available to measure up to 3 analytes in one unit (2-packs or 3-packs)

  • Provides measurements not hampered by wet-up (absorption) or dry-down (desorption)

  • Dependable with greater repeatability than surface-based sensors

  • Analog and serial outputs for remote monitoring

  • Available for following measurements: H2O, CO2, H2S, NH3, C2H2

Additional information

Brand

Endress+Hauser/E+H
Measuring principle

TDLAS
Product Headline

An advanced gas analyzer for hydrogen sulfide (H2S) measurement. The SS2100 uses tunable diode laser absorption spectroscopy (TDLAS) to determine the concentration of the analyte without coming into physical contact with the stream.
Channels

1
Analyte and Measurement ranges

H2S (Hydrogen Sulfide):
0 to 10 ppmv
0 to 1000 ppmv
0 to 5000 ppmv
0 to 5% volume
Measured Variables

Concentration
Cell Pressure
Cell Temperature
Ambient Temperature range

-20 to 50°C (-4 to 122°F)
Optional: -10 to 60°C (14 to 140°F)
Operating Pressure range

Inlet Pressure: 140 to 350 kPa (20 to 50 psig)
Sample Cell: 800 to 1200 mbara or 950 to 1700 mbara (optional)
Analyzer Wetted materials

316L stainless steel
FKM O-Rings
Glass
Power supply

120 or 240 VAC ± 10 %, 50 to 60 Hz, 300W
(18 to 24 VDC – optional for electronics only)
3 Amps max at 120 VAC , 1.5 Amps max at 240 VAC Hz
Communication

Analog Output: Two 4-20mA Isolated, 1200 ohms at 24 VDC max load
Serial: RS232C and Ethernet
Protocol: Modbus Gould RTU or Daniel RTU or ASCII
Digital Outputs: 5, Concentration Alarm, General Fault, Validation Fail, Validation 1 Active, Validation 2 Active
Digital Inputs: 2, Flow Alarm, Validation Request
Housing materials

Electronics: 304 or 316L stainless steel
Sample System Enclosure: 304 or 316L stainless steel
Hazardous area approvals

CSA Class I, Division 2
CSA Class I, Zone 2
Degree of protection

IP66, Type 4X

Reviews

There are no reviews yet.

Be the first to review “SS2100 Gas Analyzer”

Your email address will not be published. Required fields are marked *

Related products