OXY5500 Oxygen Analyzer

$5,990.00

Endress+Hauser

The OXY5500 oxygen analyzer is a compact, stand-alone, single channel analyzer that uses quenched fluorescence (QF) technology to reliably measure oxygen in natural gas and gas processing applications. A sensor probe is inserted into the process stream and is connected to the controller by an optical fiber. Featuring an LCD display and built-in data logger, the OXY5500 also has full sample conditioning systems available as well as software for a PC interface.

  • Natural gas quality measurements in production, storage, transportation, and distribution

  • Monitoring in natural gas, upstream of production and gathering sites

 

Description

Field of application

The OXY5500 oxygen analyzer is a compact, stand-alone, single channel analyzer that uses quenched fluorescence (QF) technology to reliably measure oxygen in natural gas and gas processing applications. A sensor probe is inserted into the process stream and is connected to the controller by an optical fiber. Featuring an LCD display and built-in data logger, the OXY5500 also has full sample conditioning systems available as well as software for a PC interface.

  • Natural gas quality measurements in production, storage, transportation, and distribution

  • Monitoring in natural gas, upstream of production and gathering sites

  • Measurable range from ppm levels to 0-20% O2

  • Trace measurements as low as 0-10 ppmv oxygen in hydrogen for electrolyzer applications

  • Ideal for CCUS applications since optical oxygen measurement is unaffected by CO2 or H2S in the process

Benefits

  • Easy to navigate display and menu

  • Small optical sensor with no membrane or consumable chemicals

  • Optical measurement with fast, continuous response

  • Excellent long-term stability

  • Not affected by H2S

  • No moving parts, simple operation

  • Data logging for 30 days

Additional information

Brand

Endress+Hauser/E+H

Measuring principle

Quenched Fluorescence

Product Headline

Compact, single channel oxygen (O2) analyzer with an LCD display and built-in data logger. The sensor measures oxygen using quenched fluorescence (QF) technology, which is inserted into the process stream and is connected to the controller by an optical fiber.

Channels

1

Analyte and Measurement ranges

O2 (Oxygen):
0 to 100 ppmv (minimum)
0 to 20% volume (maximum)

Measured Variables

Concentration
Cell Pressure
Cell Temperature

Ambient Temperature range

-20 to 50°C (-4 to 122°F)

Operating Pressure range

Inlet Pressure: 140 to 275 kPa (20 to 40 psig)
Sample Cell: 800 to 1200 mbara

Analyzer Wetted materials

304 & 316 stainless steel
FKM O-Rings

Power supply

108 to 253 VAC, 50/60 Hz; 5.3 Watts at 120VAC; 6.6 Watts at 240VAC
or
9 to 30 VDC (CSA), 18 to 30 VDC (IECEx/ATEX); 4.7 Watts at 24VDC

Communication

Analog Output: Two 4-20 mA outputs
Analog Input: One 4-20 mA input (sample pressure)
Fieldbus: RS-232C, RS-485, & Ethernet 10/100 with Modbus
Output Relays: Qty 2, 250 mA max load (Concentration and Fault Alarms)
USB 2.0 Works With Service Software Only
4 GB Internal Memory with Internal Data Logging

Housing materials

Electronics: 304 or 316L stainless steel

Hazardous area approvals

ATEX / IECEx – Zone 2
CSA Class I, Division 2

Degree of protection

IP64, Type 4X

Product safety

CE
RCM
FCC

Reviews

There are no reviews yet.

Be the first to review “OXY5500 Oxygen Analyzer”

Your email address will not be published. Required fields are marked *