FTI55 Capacitance Point Level Detection Solicap

$810.00

Endress+Hauser

Solicap FTI55 is a fully/partly insulated and robust rod probe for point level detection of fine-grained to coarse-grained bulk solids.

Fieldgate and Solicap represent a solution for material provisioning and logistical optimization (inventory control)

  • Process connections: Flanges and threads

  • Measurement range: 200 to 4,000mm (4 to 157″)

  • Temperature: -50 to +180°C (-58 to +356°F)

  • Pressure: -1 to +25bar (-14.5 to +363psi)

  • International explosion protection certificates, SIL

 

Description

Field of application

Solicap FTI55 is a fully/partly insulated and robust rod probe for point level detection of fine-grained to coarse-grained bulk solids. It offers maximum reliability due to its active build-up compensation and is suited for a wide range of applications thanks to numerous certificates and approvals. Due to its robust construction, it can also be used to provide accurate measurements in applications with very high lateral loads up to 300Nm.

For applications with very high lateral loads up to 300Nm. Fieldgate and Solicap represent a solution for material provisioning and logistical optimization (inventory control)
  • Process connections: Flanges and threads

  • Measurement range: 200 to 4,000mm (4 to 157″)

  • Temperature: -50 to +180°C (-58 to +356°F)

  • Pressure: -1 to +25bar (-14.5 to +363psi)

  • International explosion protection certificates, SIL

Benefits

  • Highest safety and reliability due to robust design for demanding process conditions

  • Cost savings thanks to easy and fast commissioning as calibration is performed at the press of a button

  • Universal application thanks to wide range of certificates and approvals

  • Two-stage overvoltage protection against static discharges from the silo

  • Active build-up compensation for bulk solids with caking tendency (under development)

  • Increased safety due to permanent automatic monitoring of electronics

  • Reduction in storage costs thanks to easy-to-shorten rod model (for partial insulation) and rope model (for partial and full insulation)

Additional information

Brand

Endress+Hauser/E+H

Measuring principle

Capacitive Solid

Characteristic / Application

Fully / partly isulated rod probe for small-grain / large-grain bulk solids
Simple calibration
Suitable for abrasive media
Very robust probe

Specialities

Inactive length
Active build-up compensation
High lateral loading
Extremely robust probe

Supply / Communication

19 … 253V AC
10 … 55V DC-PNP
19…253V AC bzw 10…55V DC
8/16mA, 11 … 36V DC
PFM
3-wire

Ambient temperature

-50°C … 70°C
(-58°F … 158°F)

Process temperature

-50°C … 180°C
(-58°F … 356°F)

Process pressure / max. overpressure limit

Vacuum … 25 bar
(Vacuum … 362 psi)

Main wetted parts

PE, PPS, 316L, Steel

Process connection

Thread R1 1/2, NPT1 1/2
Flanges from DN50…/ASME 2"…/JIS…

Sensor length

0.2m … 4m
(8" … 157")
Inactive length: 0.1m …1m
(2" … 39")

Communication

2- wire 19-253 VAC
DC PNP
Relais DPDT
PFM
3-wire
8/16 mA

Certificates / Approvals

ATEX, FM, CSA, IEC Ex, JPN Ex, NEPSI

Safety approvals

SIL

Design approvals

EN 10204-3.1

Components

PFM: FTC325, FTC625, FTC470Z, FTC471Z
3-wire: FTC325

Application limits

DK min 2

Reviews

There are no reviews yet.

Be the first to review “FTI55 Capacitance Point Level Detection Solicap”

Your email address will not be published. Required fields are marked *