FMI21 Capacitance Level Measurement Liquicap

$790.00

Endress+Hauser

Liquicap FMI21 is an ideal solution for Inventory Management Solutions.

The device is preconfigured from factory 0 to 100% to probe length ordered.
  • Process connection: Thread

  • Process pressure: Vacuum to 10bar (vacuum to 145psi)

  • Measuring range: Up to 2.5m (8ft)

  • Temperature: -40 to +100°C (-40 to +212°F)

  • International explosion protection certificates, overfill prevention WHG

 

Description

Field of application

Liquicap FMI21 is a simple and cost-effective rod probe for continuous level measurement for conductive liquids. High quality non-corrosive materials (carbon fibre, stainless steel) make it suitable even for aggressive liquids (e.g. acids and alkalis). Used in conjunction with the Fieldgate FXA320 (remote measured value interrogation using Internet technology), Liquicap is an ideal solution for Inventory Management Solutions.

The device is preconfigured from factory 0 to 100% to probe length ordered. It can be used as of a conductivity of 30μS/cm and the measurement is independent of the dc-value (dielectric constant) of the liquid. Suited for cistern measurements.
  • Process connection: Thread

  • Process pressure: Vacuum to 10bar (vacuum to 145psi)

  • Measuring range: Up to 2.5m (8ft)

  • Temperature: -40 to +100°C (-40 to +212°F)

  • International explosion protection certificates, overfill prevention WHG

Benefits

  • Safe and reliable function regardless of tank geometry

  • No calibration necessary (factory preconfiguration)

  • High quality, non-corrosive materials (carbon fibre, stainless steel) for use in aggressive liquids

  • No moving parts in tank

  • Cost-effective solution for continuous level measurement

  • Optimized storage by simply shortening the probe rods on site

Additional information

Brand

Endress+Hauser/E+H

Measuring principle

Capacitive

Characteristic / Application

Two-rod probe
Preconfigured from factory 0%…100%
High quality, non-corrosive materials (carbon fibre, stainless steel)
Suitable for aggressive liquids (many acids and alkalis)

Specialities

Probe shorting kit available

Supply / Communication

10 … 30VDC

Ambient temperature

-40 °C … 70 °C
(-40 °F … 158 °F)

Process temperature

-40 °C … 100 °C
(-40 °F … 212 °F)

Process pressure / max. overpressure limit

Vacuum … 10 bar
(Vacuum … 145 psi)

Main wetted parts

Probe rods:
316L/1.4404 / PP
Option: carbon fibre PP coated

Process connection

G 1½
NPT 1½

Sensor length

Total length of probe 2.5 m

Max. measurement distance

2.5 m (8 ft)

Communication

4 … 20 mA

Certificates / Approvals

ATEX, CSA, CSA C/US

Safety approvals

Overfill prevention WHG

Option

Display

Application limits

Changing, non-conductive
media, conductivity
< 3 0 μS/cm
Highly viscous liquids
> 2 000 cst

Reviews

There are no reviews yet.

Be the first to review “FMI21 Capacitance Level Measurement Liquicap”

Your email address will not be published. Required fields are marked *