| Brand | Endress+Hauser/E+H |
|---|
| Measuring principle | Coriolis |
|---|
| Product Headline | Specialist for life sciences, as remote version with up to 4 I/Os.
Dedicated to applications under sterile conditions in the life sciences industry. |
|---|
| Sensor features | Highest process quality – fully compliant to industry requirements. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
ASME BPE, 3‐A and EHEDG conform & low delta ferrite. Electropolished measuring tube in 1.4435 (316L). |
|---|
| Transmitter features | Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Fast recovery from CIP/SIP. Remote version with up to 4 I/Os; hygienic sensor connection housing with IP69. Backlit display with touch control and WLAN access. |
|---|
| Nominal diameter range | DN 8 to 50 (⅜ to 2") |
|---|
| Wetted materials | Measuring tube: 1.4435 (316L)
Connection: 1.4435 (316L); 1.4404 (316/316L) |
|---|
| Measured variables | Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration |
|---|
| Max. measurement error | Mass flow (liquid): ±0.10 %
Volume flow (liquid): ±0.10 %
Density (liquid): ±0.0005 g/cm |
|---|
| Measuring range | 0 to 70 000 kg/h (0 to 2570 lb/min) |
|---|
| Max. process pressure | PN 40, Class 150, 20K |
|---|
| Medium temperature range | Standard: –50 to +150 °C (–58 to +302 °F)
Option: –50 to +205 °C (–58 to +401 °F) |
|---|
| Ambient temperature range | Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140 °F) |
|---|
| Sensor housing material | 1.4301 (304), corrosion resistant
Sensor connection housing (standard): AlSi10Mg, coated
Sensor connection housing (option): 1.4301 (304); 1.4404 (316L) |
|---|
| Transmitter housing material | AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat |
|---|
| Degree of protection | Sensor remote version (standard): IP66/67, type 4X enclosure
Sensor remote version (option): IP69. Transmitter remote version: IP66/67, Type 4X enclosure |
|---|
| Display/Operation | 4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible |
|---|
| Outputs | 4 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output |
|---|
| Inputs | Status input
4-20 mA input |
|---|
| Digital communication | HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, PROFINET, PROFINET over Ethernet-APL, Ethernet/IP, OPC-UA |
|---|
| Power supply | DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area) |
|---|
| Hazardous area approvals | ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, KC |
|---|
| Product safety | CE, C-tick, EAC marking |
|---|
| Functional safety | Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511 |
|---|
| Metrological approvals and certificates | Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation) |
|---|
| Pressure approvals and certificates | PED, CRN |
|---|
| Material certificates | 3.1 material |
|---|
| Hygienic approvals and certificates | 3-A, EHEDG, ASME BPE, ISPE, cGMP |
|---|
Reviews
There are no reviews yet.