71555090 SWA50 iTHERM TrustSens Bluetoothand WirelessHART Integration
71555090 SWA50 iTHERM TrustSens Bluetoothand WirelessHART Integration
71555090 SWA50 iTHERM TrustSens Bluetoothand WirelessHART Integration

71555090 SWA50 iTHERM TrustSens Bluetooth and WirelessHART Integration

$580.00

Endress+Hauser

The FieldPort SWA50 converts the HART signal of the connected HART field device to a reliable and encrypted Bluetooth® or WirelessHART signal. The Endress+Hauser SmartBlue app or the Endress+Hauser Field Xpert is used to configure the FieldPort SWA50 and to visualize the measured values and status of the connected HART field device. HART field devices can be connected to the Netilion Cloud via the FieldPort SWA50 and a FieldEdge device.

 

SKU: SWA50-71555090 Categories: , , Tags: , ,

Description

Benefits at a glance

The wireless integration of iTHERM TrustSens offers users in the life science and food and beverage industries optimized process verification with minimum effort. The product bundle consisting of the self-calibrating temperature sensor iTHERMTrustSens and the intelligent Bluetooth and WirelessHART adapter offers a simple and convenient way of reading out the calibration data and minimizing risks.

  • Cost reduction by saving calibration costs and reducing calibration cycles.

  • Risk reduction and elimination of undetected failures:

  • Higher process transparency

  • Higher product safety

The FieldPort SWA50 converts the HART signal of the connected HART field device to a reliable and encrypted Bluetooth® or WirelessHART signal. The Endress+Hauser SmartBlue app or the Endress+Hauser Field Xpert is used to configure the FieldPort SWA50 and to visualize the measured values and status of the connected HART field device. HART field devices can be connected to the Netilion Cloud via the FieldPort SWA50 and a FieldEdge device.

Additional information

Brand

Endress+Hauser/E+H
Measuring principle

WirelessHART
Function

Intelligent WirelessHART and/or Bluetooth® interface module for easy and fast connection to HART devices
Certification

Non-hazardous area, ATEX, IEC Ex
Input

One point-to-point with HART device
Output

WirelessHART and/or Bluetooth® communication interface,
Operating frequency: 2.4 GHz (ISM band),
Transmission range under reference conditions:
WirelessHART communication – up to 200 m (656 ft),
Bluetooth communication – up to 40 m (131 ft)
Auxiliary power supply / Loop power supply

Loop-powered 4 to 20 mA
Dimensions (wxhxd)

W x H x D: 146 mm x 42 mm x 42 mm
(dimensions in mm 25.4 = 1 inch)
Software

Internal software for reading data from HART field devices and communicating over WirelessHART and/or Bluetooth®
Operation

Integral via DIP-switches,
Cell Phone configuration via SmartBlue App and Bluetooth®,
Field Xpert configuration via Bluetooth® or HART-modem,
PC configuration via FieldCare and HART-modem,
PC configuration via FieldCare and WirelessHART Gateway
Operating Voltage

24 V DC (min. 4 V DC, max. 30 V DC): min. 3.6 mA loop current required for start-up
Voltage drop if internal HART communication resistor is deactivated:
3.2 V in operation, < 3.8 V at start-up
Voltage drop if internal HART communication resistor is activated (270 Ohm):
< 4.2 V at 3.6 mA loop current, < 9.3 V at 22.5 mA loop current

Reviews

There are no reviews yet.

Be the first to review “71555090 SWA50 iTHERM TrustSens Bluetooth and WirelessHART Integration”

Your email address will not be published. Required fields are marked *

Related products

  • TMS01 iTHERM MultiSens Flex Multipoint ThermometerAdd to cart

    TMS01 iTHERM MultiSens Flex Multipoint Thermometer

    $760.00
  • TM411 iTHERM ModuLine Hygienic Modular ThermometerAdd to cart

    TM411 iTHERM ModuLine Hygienic Modular Thermometer

    $550.00
  • TST602 iTHERM SurfaceLine Surface ThermometerAdd to cart

    TST602 iTHERM SurfaceLine Surface Thermometer

    $400.00
  • TM412 iTHERM ModuLine Hygienic Modular ThermometerAdd to cart

    TM412 iTHERM ModuLine Hygienic Modular Thermometer

    $560.00